Honda devlops solar cell technology

Soltec Begins Sales of Thin Film Cells

TOKYO, Japan, June 12, 2007–Honda Soltec Co., Ltd., Honda’s wholly-owned subsidiary, has begun sales of thin film cells produced by Honda Engineering Co., Ltd., primarily in the Kanto area, Japan, through distributors which also provide installation service.


Honda Engineering Thin Film Module

The thin film cell developed independently by Honda uses thin film made from a compound of copper, indium, gallium and selenium (CIGS), which makes the cell more environmentally-responsible by focusing on the reduction of CO2 generated even during the production stage.

Starting from this fall, Honda Soltec will mass produce solar cells at the new plant with annual capacity of 27.5 megawatts, resulting in the expansion of sales throughout Japan.

In 2006, Honda announced a global CO2 reduction target for its products and the manufacturing of those products. In addition to its effort to reduce CO2 emissions, Honda is focusing on the development and sales of -creation products such as cogeneration units and thin film solar cells in order to further accelerate its efforts to reduce the threat of global warming.

Solar Cell Module Specifications:
Type: CIGS (copper, indium, gallium and selenium)
Maximum Output per module (W): 125*
Size (mm): 1,417 × 791 × 37
Wight (kg): 14.3
Manufacturer’s Suggested Retail Price: 60,375 yen (tax-inclusive price)
(price exclusive of tax: 57,500 yen)

* This figure for the maximum output was measured by Honda under the conditions of AM1.5, solar radiation intensity of 1kW/m2, and module temperature of 25 degrees Celsius.
* Operating ambient temperature range: 40 to -20 degrees Celsius.
* The maximum output will differ depending on solar radiation intensity, installation conditions (direction, angle, surrounding environment), geographical area, and temperature conditions. 06.

About Honda Soltec Co., Ltd.:
Establishment: December 1, 2006
Headquarters Location: Honda Motor Co., Ltd. Kumamoto Factory
1500 Hirakawa, Ozu-machi, Kikuchi-gun, Kumamoto
Sales Office Location: Wako-shi, Saitama
Capital : 4 billion yen
Capitalization ratio: 100% Honda Motor Co., Ltd.
Representative: Akio Kazusa
Employment: Approximately 150 associates (at full production)
Production Capacity Approximately 27.5MW
(approx. for 9,000 houses with 3kW system)

Honda Soltec (to begin operation this fall)

Check Also

offshore wind drone

New Acoustic Technology Protects Marine Mammals while Enabling Renewable Offshore Energy

Saildrone and RPS are using smart tools to provide long-term monitoring of endangered species over …

Leave a Reply